A lifting attachment (LAM) (English load handling attachment) FEM 9,001, terminology - dictionary of shelf control devices, page 5 is one not to the lifting apparatus belonging mechanism, those for taking up and delivering the load with the load carrying means of the Hebezeuges to be connected kann.GUV r 500, operation of load suspension devices in the lifting appliance operation '', page 4

Lifting attachment in the storage engineering

The transport of euro pallets, special pallets and lattice boxes (load aids) become in automatic camps (automatic warehouses) and into the associated Vorzone (conveying engineering) the following lifting attachment uses:

• Teleskopgabel (TG): This can be implemented simple or multiple low also one or more tines. For the movement of a euro pallet e.g. two tines are intended.
• Channel vehicle: This is an autonomous vehicle, which carries and turns the load off of the RBG there into the shelf channel. The channel can reach here lengths of approx. 20 - 30 meters. The vehicle contains mechanisms for lifting (admission from the channel), lowering (turn off in the channel) and promoting (out and storing) of the commodity. Since with this variant the number of lanes is very small in relation to the stockroom, these vehicles are mostly used in deep-freeze storage depots (small empty space which can be cooled down). With this system however only the LIFO principle can be used. It is meaningful thereby only with sort-pure channel lanes.
• Roller races are used to the transport of euro pallets or lattice boxes into longitudinal direction. Roller races can hand over only on stationary roller races and are meaningful therefore from cost reasons only at a small number at interchange points. The delivery can take place on propelled roller races or on gravity roller conveyors whereby with the latter roller race at the stroke slide to be inclinable implemented must.
• Chain conveyors are used to the transport of euro pallets or lattice boxes into transverse direction. Chain conveyors can hand over only on stationary chain conveyors and are meaningful therefore from cost reasons only at a small number at interchange points.
• Special equipments: Ability thorns (for carpets or pipes), exchange device (if two or more goods at the stroke slide to be transported), Kugeltische, Kommissionierwagen etc. to e.g. be.

Lifting attachment in the crane technology

• Load forks
• Hakengeschirre
• Cross beams
• Pliers and clamps
• Grip arm
• Excavator bucket
• Coil hook
• Load lifting magnets
• Vacuum jack

According to definition aforementioned above mechanisms rank only among the LAM, if they are not fixed (exchangeably) connected with load carrying means. The crane hook e.g. belongs to load carrying means, since it fixed with stroke-hurry is connected.

Often still slinging means are used as link between load carrying means and the lifting attachment and/or the load.

Sources

Articles in category "Lifting attachment"

We found here 2 articles.

Related Websites

We found here 3 related websites.

• Find Lifting and Rigging Attachments, crane hoist, pallet lifter ...
  Find Lifting and Rigging Attachments fast using GlobalSpec's Product Finder. Lifting and rigging attachments are used on a crane or hoist between the hook ...


• Pallet Lifting Attachment product information on ReedLink
  Find product information related to Vacuum from Material Handling Product News and ReedLink. The Anver VT-PLA Pallet Lifting Attachment lets one person lift ...


• VACUUM LIFTING ATTACHMENTS
  2 This Data sheet is concerned with vacuum lifting attachments which utilise suction ... 3 Vacuum lifting attachments have widespread use in the handling of ...